Wired Intelligent Edge

 View Only
last person joined: 2 days ago 

Bring performance and reliability to your network with the HPE Aruba Networking Core, Aggregation, and Access layer switches. Discuss the latest features and functionality of your switching devices, and find ways to improve security across your network to bring together a mobile-first solution
Back to discussions
Expand all | Collapse all

Voice vlan config and jumbo frames on Cx switches

This thread has been viewed 45 times

  • 1.  Voice vlan config and jumbo frames on Cx switches

    MVP
    Posted Dec 14, 2020 08:55 PM

    Hey,

     I've been looking at the Cx documents at the voice feature command and I'm unsure how to apply voice vlan to access ports. 


    on the Cisco, switch port voice vlan ### gives the port that extra vlan  what do we do on the cx?  I've added voice to the vlan config, but I don't see how to add those vlans to the ports  


    re jumbo frames - for the 2930, we added jumbo to the wireless access point vlan.

    I haven't found that in the docs yet for the Cx switches.

     Any guidance?  A sample config with WiFi aps, VoIP phones and downloadable user roles with clearpass would help a good bit. 

     

    ​

    ------------------------------
    Phillip Horn
    ------------------------------


  • 2.  RE: Voice vlan config and jumbo frames on Cx switches

    MVP GURU
    Posted Dec 15, 2020 03:12 PM
    Hi,

    You need to configure voice on the vlan.

    for MTU, you need to change on the interface

    ------------------------------
    PowerArubaSW : Powershell Module to use Aruba Switch API for Vlan, VlanPorts, LACP, LLDP...

    PowerArubaCP: Powershell Module to use ClearPass API (create NAD, Guest...)

    PowerArubaCX: Powershell Module to use ArubaCX API (get interface/vlan/ports info)..

    ACEP / ACMX #107 / ACDX #1281
    ------------------------------

    Original Message


  • 3.  RE: Voice vlan config and jumbo frames on Cx switches

    Posted Feb 17, 2021 10:23 AM
    if my sample config looks like this:

    interface GigabitEthernetx/x
    switchport access vlan 805
    switchport mode access
    switchport voice vlan 882
    spanning-tree portfast

    What is the AOS-CX equivalent of it on a 6400 running 10.6?   TIA.

    ------------------------------
    Manjeet Chawla
    ------------------------------

    Original Message


  • 4.  RE: Voice vlan config and jumbo frames on Cx switches

    MVP
    Posted Feb 17, 2021 11:05 AM
    Hey,

    I think this is partly right - something like this:

    Vlan 882
    Name voip
    Voice 
    ...
    Int 1/1/x
    Vlan trunk native 805
    Vlan trunk allowed 832,805

    Thanks,
    Phillip


    Sent from my phone.



    Original Message