Good evening Davide
Thanks for your response
Firstly I am using the 219 addresses as local internal networks and not for public access so I guess any others will do, the intention is to run companies 1-4 on their own separate 219 ranges for separation bout to use 22.214.171.124 range for management and shared resources printers backup devices etc, having spoken to Draytek who are the router manufacturer, they thought using the internal switch to create 4 Vlan's that each have the router IP as gateway should be the simplest way to solve the problem, I am also intending to set an Aruba 7010 as a WIFI controller and firewall, we have several 2930F switches that carry our network throughout the building that will need to setup either spanning on or simply set the ports to Vlan's, whichever is the more secure, physical access is not so much of a security problem as most are locked away.
For now thought its more an issue of is this the best route to take and then correctly setting up the Vlan's themselves
10.0.0.0 - 10.255.255.255 (10/8 prefix)
172.16.0.0 - 172.31.255.255 (172.16/12 prefix)
192.168.0.0 - 192.168.255.255 (192.168/16 prefix)
10.0.0.0 - 10.255.255.255 (10/8 prefix)172.16.0.0 - 172.31.255.255 (172.16/12 prefix)192.168.0.0 - 192.168.255.255 (192.168/16 prefix)
Stack 1 Member 1 Port 1 to Port 1 Member 1 Stack 2
Stack 1 Member 1 Port 2 to Port 2 Member 2 Stack 2
Stack 1 Member 2 Port 1 to Port 1 Member 2 Stack 2
Stack 1 Member 2 Port 2 to Port 2 Member 1 Stack 2
At Aruba, we believe that the most dynamic customer experiences happen at the Edge. Our mission is to deliver innovative solutions that harness data at the Edge to drive powerful business outcomes.
© Copyright 2021 Hewlett Packard Enterprise Development LPAll Rights Reserved.