Wired Intelligent Edge

 View Only
last person joined: yesterday 

Bring performance and reliability to your network with the HPE Aruba Networking Core, Aggregation, and Access layer switches. Discuss the latest features and functionality of your switching devices, and find ways to improve security across your network to bring together a mobile-first solution
Back to discussions
Expand all | Collapse all

No IPv4 information when using show aaa authentication port-access interface IFRANge client-status

This thread has been viewed 8 times

  • 1.  No IPv4 information when using show aaa authentication port-access interface IFRANge client-status

    Posted Dec 03, 2020 12:23 PM
    So my issue is that when I run the commad "show aaa authentication port-access interface 1/1/2 client-status " I am not getting any IPV4 information.
    Check the inpute below and the section I am looking for is bold:


    S0096SWT021# show aaa authentication port-access interface 1/1/2 client-status
    Port Access Client Status Details
    Client b8:6b:23:7e:46:ce, host/HPS28389-W7.cosd.co.san-diego.ca.us
    ============================
    Session Details
    ---------------
    Port : 1/1/2
    Session Time : 776s
    IPv4 Address :
    IPv6 Address :
    Authentication Details
    ----------------------
    Status : dot1x Authenticated
    Auth Precedence : dot1x - Authenticated, mac-auth - Not attempted
    Authorization Details
    ----------------------
    Role : RADIUS_1986087471
    Status : Applied
    Client 3c:b1:5b:4d:0c:a0, 3cb15b4d0ca0
    ============================
    Session Details
    ---------------
    Port : 1/1/2
    Session Time : 747s
    IPv4 Address :
    IPv6 Address :
    Authentication Details
    ----------------------
    Status : mac-auth Authenticated
    Auth Precedence : dot1x - Unauthenticated, mac-auth - Authenticated
    Authorization Details
    ----------------------
    Role : RADIUS_1986087471
    Status : Applied

    Is there a way to fix this or to make it work?
    I am running the latest firmware which is Version : FL.10.06.0001

    ------------------------------
    Ivan Marquez
    ------------------------------


  • 2.  RE: No IPv4 information when using show aaa authentication port-access interface IFRANge client-status

    EMPLOYEE
    Posted Dec 04, 2020 12:33 AM
    Hi Ivan,

    How does the client get an IP? 

    I think you need to run DHCP Snooping to get this information for clients using DHCP. 
    For clients with a static IP you should look at the "client track ip" command.

    ------------------------------
    Florian Baaske
    ------------------------------

    Original Message