Wired Intelligent Edge

 View Only
last person joined: yesterday 

Bring performance and reliability to your network with the HPE Aruba Networking Core, Aggregation, and Access layer switches. Discuss the latest features and functionality of your switching devices, and find ways to improve security across your network to bring together a mobile-first solution
Back to discussions
Expand all | Collapse all

block by LACP

This thread has been viewed 28 times

  • 1.  block by LACP

    Posted Jun 01, 2021 03:53 PM
    Hello, 

    Configuration : 

    2X2930F VSF OK
    2XW2016 SERVER WITH TEAMING MICROSOFT

    I encounter a LACP fault on SRV2. It is configured in the same way as the first one but the LACP status appears in "FAULT". On the Aruba side, when I look at the logs it appears that the ports concerned are blocked by LACP. The only difference I can notice is that when I type SHOW LACP PEERS, the mode is "passive" for the server that is not running and "active" for the one which works. Do you have any idea where the problem is?






    when i try to set up active lacp, i have this message : 
    Thanks for you help.
    Nicolas

    ------------------------------
    Nicolas Larchanché
    ------------------------------


  • 2.  RE: block by LACP

    Posted Jun 04, 2021 03:34 PM
    Hi Nicolas, can you try this step?
    Delete interface Trk
    add like this, "trunk 1/10,2/10 trk10 lacp"
    By.

    ------------------------------
    Elias Ya�ez Chacana
    ------------------------------

    Original Message