last person joined: 18 hours ago 

Bring performance and reliability to your network with the Aruba Core, Aggregation, and Access layer switches. Discuss the latest features and functionality of the ArubaOS-Switch and ArubaOS-CX devices, and find ways to improve security across your network to bring together a mobile first solution.
Expand all | Collapse all

Aruba 2930M Switch Connectivity to Internet

This thread has been viewed 13 times
  • 1.  Aruba 2930M Switch Connectivity to Internet

    Posted 17 days ago

    We are looking for a Toplogy Design for an Internet only site where we want to use an Aruba 2930M Switch to connect to Internet/ISP for a basic Setup. Aruba Access Point (AP314) can be used for Wireless connectivity. 
    What would be the best design approach to have the Switch and AP connectivity through to the Internet for different types of ISP hand-offs.

    Deepak Singh

  • 2.  RE: Aruba 2930M Switch Connectivity to Internet

    Posted 11 days ago
    Do you have an ISP router that can do the Network Address Translation (NAT) and DHCP? In that case, use the switch as a standard L2 device or L3 router if your ISP supports that.

    The 2930M will NOT do NAT, so you will need an (exiting) router to do that.

    Reach out to your Aruba partner for dedicated advice.

    Herman Robers
    If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.