Wired Intelligent Edge

last person joined: 7 hours ago 

Bring performance and reliability to your network with the Aruba Core, Aggregation, and Access layer switches. Discuss the latest features and functionality of the ArubaOS-Switch and ArubaOS-CX devices, and find ways to improve security across your network to bring together a mobile first solution.
Expand all | Collapse all

Aruba 6100 CX but no netedit in central?

This thread has been viewed 23 times
  • 1.  Aruba 6100 CX but no netedit in central?

    Posted 24 days ago

    Hi,

    Can't seem to find netedit for 6100?

    Is that not supported yet?



    ------------------------------
    Sebastian Johansen
    ------------------------------


  • 2.  RE: Aruba 6100 CX but no netedit in central?

    Posted 24 days ago
    Hello Sebastian, the Aruba 6100 Switch series was supported by Aruba NetEdit since Aruba NetEdit 2.0.11 (January 2021). As of today Aruba NetEdit 2.1.1 is available so the Aruba 6100 Switch series is necessarily still supported.

    Aruba NetEdit 2.1.1 supports up to ArubaOS-CX 10.08.0001, 10.07.0020 and 10.06.0140 software builds.

    Currently Aruba 6100 Switch series can be (and it is expected to) run with these recent ArubaOS-CX software builds:
    1. ArubaOS-CX 10.08.0001
    2. ArubaOS-CX 10.07.0021
    3. ArubaOS-CX 10.06.0140

    ------------------------------
    Davide Poletto
    ------------------------------



  • 3.  RE: Aruba 6100 CX but no netedit in central?

    Posted 24 days ago
    Thanks for the fast reply, i would need to update my 6100  CX to alteast FW verison 10.06.0140 version? Currenlty on 10.06.0110 as it is the recommended one

    ------------------------------
    Sebastian Johansen
    ------------------------------



  • 4.  RE: Aruba 6100 CX but no netedit in central?

    Posted 24 days ago
    Checked the releasenotes, and i can see that central only support template based configuration.. strange that they support netedit inn central for 6200 but not for 6100

    ------------------------------
    Sebastian Johansen
    ------------------------------



  • 5.  RE: Aruba 6100 CX but no netedit in central?

    Posted 24 days ago
    Hi Sebastian,

    I believe your question is about Multi-Editor support for 6100.
    As of now 6100 supported only with template group configurations - here and the recommended software version for 6100 to work with Aruba Central is 10.06.0110 or later.

    ------------------------------
    Raghunandan H.A.
    ------------------------------



  • 6.  RE: Aruba 6100 CX but no netedit in central?

    Posted 24 days ago
    That is correct, will multi edit be supported for 6100 in the near further?

    ------------------------------
    Sebastian Johansen
    ------------------------------



  • 7.  RE: Aruba 6100 CX but no netedit in central?

    Posted 23 days ago