Wired Intelligent Edge

 View Only
last person joined: 2 days ago 

Bring performance and reliability to your network with the HPE Aruba Networking Core, Aggregation, and Access layer switches. Discuss the latest features and functionality of your switching devices, and find ways to improve security across your network to bring together a mobile-first solution
Back to discussions
Expand all | Collapse all

Aruba 6100 CX but no netedit in central?

This thread has been viewed 37 times

  • 1.  Aruba 6100 CX but no netedit in central?

    Posted Sep 01, 2021 07:05 AM

    Hi,

    Can't seem to find netedit for 6100?

    Is that not supported yet?



    ------------------------------
    Sebastian Johansen
    ------------------------------


  • 2.  RE: Aruba 6100 CX but no netedit in central?

    MVP GURU
    Posted Sep 01, 2021 07:21 AM
    Hello Sebastian, the Aruba 6100 Switch series was supported by Aruba NetEdit since Aruba NetEdit 2.0.11 (January 2021). As of today Aruba NetEdit 2.1.1 is available so the Aruba 6100 Switch series is necessarily still supported.

    Aruba NetEdit 2.1.1 supports up to ArubaOS-CX 10.08.0001, 10.07.0020 and 10.06.0140 software builds.

    Currently Aruba 6100 Switch series can be (and it is expected to) run with these recent ArubaOS-CX software builds:
    1. ArubaOS-CX 10.08.0001
    2. ArubaOS-CX 10.07.0021
    3. ArubaOS-CX 10.06.0140

    ------------------------------
    Davide Poletto
    ------------------------------

    Original Message


  • 3.  RE: Aruba 6100 CX but no netedit in central?

    Posted Sep 01, 2021 07:40 AM
    Thanks for the fast reply, i would need to update my 6100  CX to alteast FW verison 10.06.0140 version? Currenlty on 10.06.0110 as it is the recommended one

    ------------------------------
    Sebastian Johansen
    ------------------------------

    Original Message


  • 4.  RE: Aruba 6100 CX but no netedit in central?

    Posted Sep 01, 2021 08:27 AM
    Checked the releasenotes, and i can see that central only support template based configuration.. strange that they support netedit inn central for 6200 but not for 6100

    ------------------------------
    Sebastian Johansen
    ------------------------------

    Original Message


  • 5.  RE: Aruba 6100 CX but no netedit in central?

    EMPLOYEE
    Posted Sep 01, 2021 08:49 AM
    Hi Sebastian,

    I believe your question is about Multi-Editor support for 6100.
    As of now 6100 supported only with template group configurations - here and the recommended software version for 6100 to work with Aruba Central is 10.06.0110 or later.

    ------------------------------
    Raghunandan H.A.
    ------------------------------

    Original Message


  • 6.  RE: Aruba 6100 CX but no netedit in central?

    Posted Sep 01, 2021 08:52 AM
    That is correct, will multi edit be supported for 6100 in the near further?

    ------------------------------
    Sebastian Johansen
    ------------------------------

    Original Message


  • 7.  RE: Aruba 6100 CX but no netedit in central?

    EMPLOYEE
    Posted Sep 02, 2021 03:15 AM


    Original Message


  • 8.  RE: Aruba 6100 CX but no netedit in central?

    EMPLOYEE
    Posted Jan 26, 2022 03:29 PM
    As of Central version 2.5.4 the 6100 now supports UI config and thus multi-edit.
    https://help.central.arubanetworks.com/latest/documentation/online_help/content/nms/aos-cx/supported-platforms/supported-switches-cx.htm

    ------------------------------
    Jeremy Bradrick
    ------------------------------

    Original Message