Wired Intelligent Edge

 View Only
last person joined: 15 hours ago 

Bring performance and reliability to your network with the HPE Aruba Networking Core, Aggregation, and Access layer switches. Discuss the latest features and functionality of your switching devices, and find ways to improve security across your network to bring together a mobile-first solution
Expand all | Collapse all

3810M switch port not working

This thread has been viewed 13 times
  • 1.  3810M switch port not working

    Posted Jan 01, 2022 12:27 AM
    Aruba 3810M switch 1-24 port not working, we received two fresh switches both having same problem, giving following error message.


    31/21 06:46:21 03803 chassis: System Self test completed on  Master
    I 12/31/21 06:46:21 02711 console: USB console cable connected
    I 12/31/21 06:46:22 03802 chassis: System Self test started on  Master
    I 12/31/21 06:46:23 03803 chassis: System Self test completed on  Master
    I 12/31/21 06:46:23 05046 chassis: Flexible Module JL083A inserted in slot
                Expansion Module A
    I 12/31/21 06:46:33 05048 chassis: Flexible Module JL083A in slot Expansion
                Module A is active.
    I 12/31/21 06:46:33 05578 profile-manager: With this SW release the poe-value
                field is not allowed to be set when poe-alloc-by is not value.
                Changing to default value of 17w.
    I 12/31/21 06:46:33 00061 system: -----------------------------------------
    I 12/31/21 06:46:33 00062 system: System went down without saving crash
                information
    I 12/31/21 06:46:33 03006 system: Reason for system reboot: Cold boot
    I 12/31/21 06:46:33 02711 console: USB console cable connected
    I 12/31/21 06:46:33 02711 console: USB console cable connected
    I 12/31/21 06:46:33 02759 chassis: Savepower LED timer is OFF.
    M 12/31/21 06:46:33 02796 chassis: Internal power supply 1 inserted. Total fault
                count: 0.
    M 12/31/21 06:46:33 02797 chassis: Internal power supply 1 is OK. Total fault
                count: 0.
    I 12/31/21 06:46:34 02012 mtm: A non-multicast client: Non-Mcast client DT, is
                registered with client ID:  1
    I 12/31/21 06:46:34 02682 OOBM: OOBM - Enabled globally.
    I 12/31/21 06:46:34 00092 dhcp: Enabling Auto Image Config Download via DHCP and
                turning off auto-tftp if enabled
    I 12/31/21 06:46:34 05177 ip: Setting IP address 0.0.0.0 as default gateway.
    I 12/31/21 06:46:35 00965 dhcpv6c: DHCPv6 client has been enabled on Vlan-id: 1
    I 12/31/21 06:46:35 02604 dhcpv6r: Inclusion of client link-layer address in
                DHCPv6 relay message is disabled.
    I 12/31/21 06:46:35 00690 udpf: DHCP relay agent feature enabled
    I 12/31/21 06:46:35 02637 srcip: TACACS admin policy is 'outgoing interface'
    I 12/31/21 06:46:35 02638 srcip: TACACS oper policy is 'outgoing interface'
    I 12/31/21 06:46:35 02637 srcip: RADIUS admin policy is 'outgoing interface'
    I 12/31/21 06:46:35 02638 srcip: RADIUS oper policy is 'outgoing interface'
    I 12/31/21 06:46:35 02637 srcip: SYSLOG admin policy is 'outgoing interface'
    I 12/31/21 06:46:35 02638 srcip: SYSLOG oper policy is 'outgoing interface'
    I 12/31/21 06:46:35 02637 srcip: TELNET admin policy is 'outgoing interface'
    I 12/31/21 06:46:35 02638 srcip: TELNET oper policy is 'outgoing interface'
    I 12/31/21 06:46:35 02637 srcip: TFTP admin policy is 'outgoing interface'
    I 12/31/21 06:46:35 02638 srcip: TFTP oper policy is 'outgoing interface'
    I 12/31/21 06:46:35 02637 srcip: SNTP admin policy is 'outgoing interface'
    I 12/31/21 06:46:35 02638 srcip: SNTP oper policy is 'outgoing interface'
    I 12/31/21 06:46:35 02637 srcip: SFLOW admin policy is 'outgoing interface'
    I 12/31/21 06:46:35 02638 srcip: SFLOW oper policy is 'outgoing interface'
    I 12/31/21 06:46:35 02637 srcip: TUNNELED-NODE-SERVE admin policy is 'outgoing
                interface'
    I 12/31/21 06:46:35 02638 srcip: TUNNELED-NODE-SERVE oper policy is 'outgoing
                interface'
    I 12/31/21 06:46:35 02637 srcip: RADIUS admin policy for IPv6 is 'outgoing
                interface'
    I 12/31/21 06:46:35 02638 srcip: RADIUS oper policy for IPv6 is 'outgoing
                interface'
    I 12/31/21 06:46:35 00116 telnet: telnetd service enabled on OOBM
    I 12/31/21 06:46:35 00110 telnet: telnetd service enabled
    I 12/31/21 06:46:36 05709 auth: RADIUS tracking interval is set to 300 seconds.
    I 12/31/21 06:46:36 05710 auth: RADIUS dead-time infinite is disabled.
    I 12/31/21 06:46:36 05719 auth: RADIUS tracking dead servers only is disabled.
    I 12/31/21 06:46:36 05720 auth: RADIUS tracking request packet count is set to
                3.
    I 12/31/21 06:46:36 00433 ssh: Ssh server enabled
    I 12/31/21 06:46:36 04695 auth: Command authorization method set to none.
    I 12/31/21 06:46:36 00128 tftp: Enable succeeded
    I 12/31/21 06:46:36 00417 cdp: CDP enabled
    I 12/31/21 06:46:36 00688 lldp: LLDP - enabled
    I 12/31/21 06:46:36 02633 SNTP: Client authentication is disabled.
    I 12/31/21 06:46:36 00410 SNTP: Client is enabled.
    I 12/31/21 06:46:36 02012 mtm: A non-multicast client: Non-Mcast client Op, is
                registered with client ID:  3
    I 12/31/21 06:46:36 04257 dhcp-server: Ping-check configured with retry count =
                2, timeout = 1
    I 12/31/21 06:46:36 04260 dhcp-server: Conflict-logging is disabled
    I 12/31/21 06:46:37 00066 system: Mgmt Module 1 Booted
    I 12/31/21 06:46:37 00068 chassis: Ports 1-24,A Inserted
    I 12/31/21 06:46:38 03401 crypto: Function POWER UP passed selftest.
    I 12/31/21 06:46:50 03846 InSysProg: Ports 1-24,A: Checking for firmware
                updates.
    I 12/31/21 06:46:50 00375 chassis: Ports 1-24,A Downloading
    I 12/31/21 06:46:50 00376 chassis: Ports 1-24,A Download Complete
    W 12/31/21 06:46:57 05044 chassis: Flexible Module JL083A in slot Expansion
                Module A is inactive. Flexible Module JL083A does not match
                configured JL078A.
    I 12/31/21 06:46:59 00422 chassis: Ports 1-24,A Ready
    I 12/31/21 06:49:25 03362 auth: User 'unknown' logged in from 0.0.0.0 to CONSOLE
                session
    I 12/31/21 06:49:29 00179 mgr: SME CONSOLE Session - MANAGER Mode
    M 12/31/21 06:49:56 04701 chassis: Ports 1-24,A crash detected - Available
    I 12/31/21 06:52:02 05101 amp-server: AMP server configuration is disabled due
                to first configuration.
    W 12/31/21 06:53:02 03840 chassis: Ports 1-24,A module ROM Tomstone: 0x1100003B
    W 12/31/21 06:53:04 03838 chassis: Ports 1-24,A failed to boot. Timeout reached:
                Failed to receive ROM Alive message
    ----  Bottom of Log : Events Listed = 71  ----


    ------------------------------
    Dileep Kumar Pareek
    ------------------------------


  • 2.  RE: 3810M switch port not working

    MVP GURU
    Posted Jan 01, 2022 08:20 AM
    It could be an Hardware issue or a Software bug (Module ROM Tombstone).

    Have you tried to reboot the switch after removing the Flexible Module JL083A from Expansion Slot A?

    What is the ArubaOS-Switch software version the switch is currently running on?

    Are you able to update the ArubaOS-Switch software version to latest software build KB.16.11.0003 of the KB.16.11 branch (as example)?

    I don't understand why there is a reference about a Aruba 3810M/2930M 1-port QSFP+ 40GbE Module (SKU JL078A) although it seems you're dealing with a Aruba 3810M/2930M 4-port 100M/1G/10G SFP+ MACsec Module (SKU JL083A)...in any case IIRC the oldest KB.16.01 software version is the minimum required to let the Aruba 3810M Switch series to support both SKUs.

    ------------------------------
    Davide Poletto
    ------------------------------