Wired Intelligent Edge

 View Only
last person joined: yesterday 

Bring performance and reliability to your network with the HPE Aruba Networking Core, Aggregation, and Access layer switches. Discuss the latest features and functionality of your switching devices, and find ways to improve security across your network to bring together a mobile-first solution
Back to discussions
Expand all | Collapse all

6300M SPAN Configuration Issues

This thread has been viewed 9 times

  • 1.  6300M SPAN Configuration Issues

    Posted Oct 04, 2021 11:34 AM

    Hello Engineers
    Hope everyone is very well.
    I have an issue on 6300 core switch, I am not able to configure the same source ports to different destination ports. Below is the error:
    source interface 1/1/1 both
    Cannot add, interface 1/1/1 is currently an enabled mirror source
    % Command failed.

    In our scenario we are to configure the same source ports to different destination port but the switch is not accepting it. Grateful if you could help me out with this.
    We have this configured:
     Source: interface 1/1/1 both
     Source: interface 3/1/23 both
     Source: interface 3/1/22 both
     Source: interface 1/1/4 both
     Source: interface 1/1/3 both
     Source: interface 1/1/2 both
     Source: interface 3/1/21 both
     Source: interface 3/1/24 both
     Destination: interface 1/1/36

    We want to have a second one that will look like below:
     Source: interface 1/1/1 both
     Source: interface 3/1/23 both
     Source: interface 3/1/22 both
     Source: interface 1/1/4 both
     Source: interface 1/1/3 both
     Source: interface 1/1/2 both
     Source: interface 3/1/21 both
     Source: interface 3/1/24 both
     Destination: interface 1/1/37

    --
    Stay Blessed
    WhatsApp:+233505093050
    +233559449484
    Skype: dkawayevu