Hi Shamzudheen,
There might be an issue with the transceivers. I suggest you to open a ticket with the support and to provide them the following info:
1. The output of the "show tech transceivers" command
2. The serial numbers of the J9151E - this will be very important for the support
Upgrading the SW of the switch is always a good idea, but the J9151E transceivers are supported with all SW versions of the 2930m devices - which is already confirmed by parnassus (page 52):
https://support.hpe.com/hpesc/public/docDisplay?docId=a00028947en_us------------------------------
Stanislav Naydenov
------------------------------
Original Message:
Sent: Jun 06, 2021 01:29 PM
From: SHAMZUDHEEN NK
Subject: 10G SFP+ LR (J9151E) is not detecting in Aruba 2930M switch
Dear Team,
We have installed 4 X 2930M switches with 4SFP+ macsec module. When I verified the status of module (show module), I can see the 4SFP+ macsec module in all switches as active. The issue is that the switches are not detecting the transceivers (10G SFP+ LR - J9151E) which are inserted on the 4SFP+ macsec module.
Is there any special configuration required to detect the SFP transceivers on the 4SFP+ macsec module? or is there any firmware compatibility issue?
Reg,
Shamz
------------------------------
SHAMZUDHEEN NK
------------------------------