Hello,
I have a number of 2620 switches in production that I'm looking to setup remote access to via the console port.
Of the 8 switches, I can only get a working console connection on 4. I'm using the same console cable, laptop, terminal settings on all switches.
The only difference I have noticed between the working switches and the non-working switches is when I run a 'show session-list' command.
On a working switch the 'Privilege' is set to 'Manager':
But on a non-working switch the 'Privilege' is set to either 'Superuser' or is blank:
My question is, do you know how I can set the 'Privilege' level for the console port, so I can try setting it to 'Manager' on the non-working switches to see if it fixes my issue?
------------------------------
Adam Bishop
------------------------------