Wired

last person joined: 18 hours ago 

Bring performance and reliability to your network with the Aruba Core, Aggregation, and Access layer switches. Discuss the latest features and functionality of the ArubaOS-Switch and ArubaOS-CX devices, and find ways to improve security across your network to bring together a mobile first solution.
Expand all | Collapse all

Stacking ports on MAS

This thread has been viewed 9 times
  • 1.  Stacking ports on MAS

    Posted Mar 31, 2021 12:32 PM
    Is it possible to re-configure the stacking ports on S2500 switches to be regular 10GB Ethernet uplink ports?

    ------------------------------
    Jon Koelker
    ------------------------------


  • 2.  RE: Stacking ports on MAS

    Posted Apr 01, 2021 03:56 AM
    Yes, check this knowledgebase article on how to do that.

    ------------------------------
    Herman Robers
    ------------------------
    If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.
    ------------------------------



  • 3.  RE: Stacking ports on MAS

    Posted Apr 01, 2021 07:43 AM

    Thanks for the info. Just a point of clarification – when you 'delete' a stacking port, does it then become configurable as a regular GB Ethernet port or is it not an available interface at that point?

     

     

     

     

                                                                                                   jk

     






  • 4.  RE: Stacking ports on MAS

    Posted Apr 01, 2021 07:54 AM
    Correct, or the other way around: if a port is configured as stacking port, it is hidden as normal port and can't be configured.

    By default, the uplink 2 and 3 are configured as stacking port, and you can remove them to make them available again as normal interface.
    Similar, you can configure other ports (even the 1Gbps copper ports) as stacking port, at which point they are removed as normal interface.

    ------------------------------
    Herman Robers
    ------------------------
    If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.
    ------------------------------



  • 5.  RE: Stacking ports on MAS

    Posted Apr 01, 2021 12:14 PM

    Great – thanks! Appreciate the help.

     

     

     

     

                                                                                                   jk