Wired

last person joined: 11 hours ago 

Bring performance and reliability to your network with the Aruba Core, Aggregation, and Access layer switches. Discuss the latest features and functionality of the ArubaOS-Switch and ArubaOS-CX devices, and find ways to improve security across your network to bring together a mobile first solution.
Expand all | Collapse all

Stacking ports on MAS

This thread has been viewed 8 times
  • 1.  Stacking ports on MAS

    Posted 17 days ago
    Is it possible to re-configure the stacking ports on S2500 switches to be regular 10GB Ethernet uplink ports?

    ------------------------------
    Jon Koelker
    ------------------------------


  • 2.  RE: Stacking ports on MAS

    Posted 16 days ago
    Yes, check this knowledgebase article on how to do that.

    ------------------------------
    Herman Robers
    ------------------------
    If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.
    ------------------------------



  • 3.  RE: Stacking ports on MAS

    Posted 16 days ago

    Thanks for the info. Just a point of clarification – when you 'delete' a stacking port, does it then become configurable as a regular GB Ethernet port or is it not an available interface at that point?

     

     

     

     

                                                                                                   jk

     






  • 4.  RE: Stacking ports on MAS

    Posted 16 days ago
    Correct, or the other way around: if a port is configured as stacking port, it is hidden as normal port and can't be configured.

    By default, the uplink 2 and 3 are configured as stacking port, and you can remove them to make them available again as normal interface.
    Similar, you can configure other ports (even the 1Gbps copper ports) as stacking port, at which point they are removed as normal interface.

    ------------------------------
    Herman Robers
    ------------------------
    If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.
    ------------------------------



  • 5.  RE: Stacking ports on MAS

    Posted 16 days ago

    Great – thanks! Appreciate the help.

     

     

     

     

                                                                                                   jk