Hi,
I have a comware switch that I want to exchange for an Aruba CX 8320 switch.
On the old comware switch, I have some qos configuration, which I want to migrate on the Aruba CX 8320 switch:
traffic classifier any operator and
if-match any
#
traffic behavior pri7
accounting byte
remark dot1p 7
#
qos policy any-pri7
classifier any behavior pri7
#
interface Ten-GigabitEthernet1/0/50
port link-mode bridge
port access vlan 555
flow-control
qos apply policy any-pri7 inbound
qos apply policy any-pri7 outbound
Which commands on the Aruba CX 8320 Switch are similar to the comware commands?
Thanks in advance
Regards
Chris
------------------------------
Chris vBargen
------------------------------