Hello,
I have an issue with migrating from Cisco to Aruba switch.
I cannot configure 2 IP Addresses in same VLAN/subnet on Aruba.
Specifically:
On Cisco switch there is next configuration:
interface Vlan 100
ip address 192.168.100.1 255.255.255.0
ip address 192.168.100.254 255.255.255.0 secondary
;
This config is okay, but when I try to configure the same on the Aruba 2930f:
vlan 100
ip address 192.168.100.1 /24
ip address 192.168.100.254 /24
There is error message after that.
I tried to configure Loopback with IP address 192.168.100.254 - same error.
Please help with this issue. In general, is this possible on Aruba switches?
------------------------------
Mikhail Novoselov
------------------------------