Wired Intelligent Edge

 View Only
last person joined: yesterday 

Bring performance and reliability to your network with the HPE Aruba Networking Core, Aggregation, and Access layer switches. Discuss the latest features and functionality of your switching devices, and find ways to improve security across your network to bring together a mobile-first solution
Back to discussions
Expand all | Collapse all

ARUBA 2930F multiple IP adresses in one VLAN/Subnet

This thread has been viewed 16 times

  • 1.  ARUBA 2930F multiple IP adresses in one VLAN/Subnet

    Posted Apr 01, 2021 10:53 AM
    Hello,

    I have an issue with migrating from Cisco to Aruba switch.
    I cannot configure 2 IP Addresses in same VLAN/subnet on Aruba.

    Specifically:
    On Cisco switch there is next configuration:
    interface Vlan 100
    ip address 192.168.100.1 255.255.255.0
    ip address 192.168.100.254 255.255.255.0 secondary
    ;
    This config is okay, but when I try to configure the same on the Aruba 2930f:
    vlan 100
    ip address 192.168.100.1 /24
    ip address 192.168.100.254 /24
    There is error message after that.

    I tried to configure Loopback with IP address 192.168.100.254 - same error.

    Please help with this issue. In general, is this possible on Aruba switches?

    ------------------------------
    Mikhail Novoselov
    ------------------------------


  • 2.  RE: ARUBA 2930F multiple IP adresses in one VLAN/Subnet

    MVP GURU
    Posted Apr 01, 2021 12:46 PM
    Hi Mikhail, if I recall correctly the VLAN Multinetting (where Multinetting = assigning Multiple IP Addresses to a VLAN) requires that additional VLAN IP Addresses must belong to different Subnets, example:

    vlan 100
ip address 192.168.100.1 255.255.255.0
ip address 192.168.101.1 255.255.255.0
ip address 192.168.102.254 255.255.255.0
​


    ------------------------------
    Davide Poletto
    ------------------------------

    Original Message


  • 3.  RE: ARUBA 2930F multiple IP adresses in one VLAN/Subnet

    Posted Apr 01, 2021 01:23 PM
    Hello,

    Thank you.

    I need several addresses from the same subnet in one Vlan.
    Not Vlan multinetting, but Vlan multiaddressing in same subnet.

    Here is correct Cisco config:

    interface Vlan 100
    ip address 192.168.100.1 255.255.255.0
    ip address 192.168.100.2 255.255.255.0 secondary
    ip address 192.168.100.3 255.255.255.0 secondary
    ip address 192.168.100.4 255.255.255.0 secondary
    ip address 192.168.100.5 255.255.255.0 secondary

    An then I can ping all above ip addresses from host in VLan 100.

    Can I configure the same on aruba switch?

    ------------------------------
    Mikhail Novoselov
    ------------------------------

    Original Message


  • 4.  RE: ARUBA 2930F multiple IP adresses in one VLAN/Subnet

    MVP GURU
    Posted Apr 01, 2021 06:54 PM
    If I'm not mistaken that is not possible on ArubaOS-Switch operating system used by some Aruba Switch Series like the Aruba 2930F.

    ------------------------------
    Davide Poletto
    ------------------------------

    Original Message