Wired Intelligent Edge

 View Only
last person joined: 2 days ago 

Bring performance and reliability to your network with the HPE Aruba Networking Core, Aggregation, and Access layer switches. Discuss the latest features and functionality of your switching devices, and find ways to improve security across your network to bring together a mobile-first solution
Back to discussions
Expand all | Collapse all

TFTP server on 2530 or 2930F

This thread has been viewed 26 times

  • 1.  TFTP server on 2530 or 2930F

    Posted Dec 14, 2020 04:52 PM
    Hello,
    I would like to configure the aruba switch 2530/2930 as TFTP server to minimise the utilisation off the WAN link.
    I would like to send the image from my pc to one switch on remote site , and then transfert the image from this switch to other swiches.

    Is that possible ?
    The only command I found was # tftp server

    config)# tftp
    client Enable/disable the TFTP client.
    HOST-NAME-STR hostname of a remote system
    ipv6 IPv6 TFTP client
    server Enable/disable the TFTP server
    IP-ADDR IPv4 address of a remote system
    <cr>

    (config)# tftp server
    <cr>


    is it enough ?

    Thank you for your help

    ​

    ------------------------------
    abdelakder kherrab
    ------------------------------


  • 2.  RE: TFTP server on 2530 or 2930F

    Posted Dec 16, 2020 11:33 AM

    Hello,

    Yes, you simply need to enable the to tftp server as mentioned and issue the following command from the switch you want to copy the firmware to:

    copy tftp switch.ip.address /os/{primary|secondary} {primary|secondary}

    That should do it. Be careful with IP authorized manager.


    Cheers,

    Aaron




    ------------------------------
    Aaron Fuentes Ohnell
    ------------------------------

    Original Message


  • 3.  RE: TFTP server on 2530 or 2930F

    MVP GURU
    Posted Dec 20, 2020 09:35 AM

    Hi,

    No sure if it is possible you need to have the same device model for copy the firmware



    ------------------------------
    PowerArubaSW : Powershell Module to use Aruba Switch API for Vlan, VlanPorts, LACP, LLDP...

    PowerArubaCP: Powershell Module to use ClearPass API (create NAD, Guest...)

    PowerArubaCX: Powershell Module to use ArubaCX API (get interface/vlan/ports info)..

    ACEP / ACMX #107 / ACDX #1281
    ------------------------------

    Original Message