Wired Intelligent Edge

 View Only
last person joined: 22 hours ago 

Bring performance and reliability to your network with the HPE Aruba Networking Core, Aggregation, and Access layer switches. Discuss the latest features and functionality of your switching devices, and find ways to improve security across your network to bring together a mobile-first solution
Back to discussions
Expand all | Collapse all

2930F shows 34% Packet Buffer

This thread has been viewed 16 times

  • 1.  2930F shows 34% Packet Buffer

    Posted Jan 20, 2022 10:29 AM
    I've factory reset this switch, applied my config, applied different configs, and it always shows 34% in the web interface. I believe software version is 16.0001.x. 

    What is my upgrade track to install newer firmware?

    ------------------------------
    John Robertson
    ------------------------------


  • 2.  RE: 2930F shows 34% Packet Buffer

    MVP GURU
    Posted Jan 20, 2022 04:35 PM
    If I were you I'll directly update to latest WC.16.11.0003. Software and Release Notes on ASP.



    Original Message


  • 3.  RE: 2930F shows 34% Packet Buffer

    Posted Jan 20, 2022 04:45 PM
    Awesome, I didn't know if I could make that huge of a jump in firmware. Will get it installed in our next maintenance window.

    ------------------------------
    John Robertson
    ------------------------------

    Original Message


  • 4.  RE: 2930F shows 34% Packet Buffer

    Posted Feb 01, 2024 10:25 AM

    I would like to add that I see this on WC.16.09.0021 with multiple 2930F.


    Original Message