Wired Intelligent Edge

 View Only
last person joined: yesterday 

Bring performance and reliability to your network with the HPE Aruba Networking Core, Aggregation, and Access layer switches. Discuss the latest features and functionality of your switching devices, and find ways to improve security across your network to bring together a mobile-first solution
Back to discussions
Expand all | Collapse all

Using global variable for "job" command. job for Aruba OS-CX

This thread has been viewed 16 times

  • 1.  Using global variable for "job" command. job for Aruba OS-CX

    Posted May 26, 2021 06:00 AM
    Dear colleagues, 

    does Aruba OS-S have a global variable like cisco $h (hostname) or $t (timestamp) for using with "job" command?:

    Aruba style: 
    job Backup1 at 15:12 "copy run tftp 10.0.0.1 Backup-test.txt"​

    If we use this line every next backup will rewrite a previous.  
    Look below at code, this is cisco style, where we can use variable $h-$t.

    archive
 log config
  logging enable
  hidekeys
 path tftp://10.0.0.1/Configs/$h-$t
 write-memory

    ​1. Does Aruba OS-S support variables?
    2. Is it possible create job triggered by event "write memory" (make a backup while admin saving config)​.?
    3. Does Aruba CX support feature "job", or maybe will support in next firmware update?

    Thanks!

    ------------------------------
    Dmitro Kardash
    ------------------------------