Wired Intelligent Edge

 View Only
last person joined: 13 hours ago 

Bring performance and reliability to your network with the HPE Aruba Networking Core, Aggregation, and Access layer switches. Discuss the latest features and functionality of your switching devices, and find ways to improve security across your network to bring together a mobile-first solution
Back to discussions
Expand all | Collapse all

Aruba CX, QoS for Voice VLAN

This thread has been viewed 36 times

  • 1.  Aruba CX, QoS for Voice VLAN

    Posted Jan 04, 2021 02:04 PM
    I am migrating few customers from ArubaOS-Switch to Aruba CX. It was common in old ArubaOS-Switch switches to configure voice vlans and assign QOS using these simple commands:

    vlan xx
    name "Voice_VLAN"
    qos priority 6
    voice
    exit

    is there any single command in Aruba CX that can assign certain CoS or DSCP value to all traffic in certain vlan? 

    I am not able to find a command to mark QoS values based on VLAN, the only command I found was per interface:

    switch(config)# interface 1/1/1
    switch(config-if)# qos trust none
    switch(config-if)# qos cos 3




    ------------------------------
    Ahmad Enaya
    ------------------------------