Wired Intelligent Edge

 View Only
last person joined: 3 days ago 

Bring performance and reliability to your network with the HPE Aruba Networking Core, Aggregation, and Access layer switches. Discuss the latest features and functionality of your switching devices, and find ways to improve security across your network to bring together a mobile-first solution
Back to discussions
Expand all | Collapse all

6300M member replacement

This thread has been viewed 15 times

  • 1.  6300M member replacement

    Posted Feb 21, 2021 09:55 PM
    Hi,

    If I replace a member switch in 6300M series stack, will the new member (same part) receive automatic config from the master OR do I need to load the running config in the new member switch upfront and install in the stack?

    Also, If the member has the lower version os, will it be fetch from the master once it join to the stack or do I need to prepare the new member with the same os as master before install into the stack? 

    Thank you for the support.

    ------------------------------
    Chirag Patel
    ------------------------------


  • 2.  RE: 6300M member replacement

    EMPLOYEE
    Posted Feb 21, 2021 10:04 PM

    the firmware image will automatically sync across the VSF stack.
    check this guide.
    https://www.arubanetworks.com/techdocs/AOS-CX/10.06/HTML/5200-7726/index.html#GUID-3F677E8E-0C4C-4A10-A8F2-9306AD8C45C1.html

    ------------------------------
    Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba.
    ------------------------------

    Original Message


  • 3.  RE: 6300M member replacement

    Posted Feb 24, 2021 10:27 PM
    Thanks, Ariyap.


    ------------------------------
    Chirag Patel
    ------------------------------

    Original Message