Wired Intelligent Edge

 View Only
last person joined: yesterday 

Bring performance and reliability to your network with the HPE Aruba Networking Core, Aggregation, and Access layer switches. Discuss the latest features and functionality of your switching devices, and find ways to improve security across your network to bring together a mobile-first solution
Back to discussions
Expand all | Collapse all

[6300/Airwave] Switch not detected by airwave

This thread has been viewed 17 times

  • 1.  [6300/Airwave] Switch not detected by airwave

    MVP
    Posted May 04, 2021 12:40 PM
    Hi everyone,

    I'm running into a weird issue with AirWave and a CX6300 switch, the switch is not being detected/added by AirWave with the following error message:


    SysObjectID ".1.3.6.1.4.1.8072.3.2.10" corresponds to more than one device type, remaining as generic device type.

    I have added multiple 6300 and 6400 switches before this and I can't tell a difference as far as config goes, I even verified and this OID doesn't exist on the other switches that were added successfully so I'm at a loss.

    Tech specs:
    Switches: 6300[24/48p SR5, 48p1G]/6405
    Firmware: FL.10.06.0101
    Airwave: 8.2.12.1 (VM created from ova, currently in trial period pending migrating licenses from old airwave system)



    ------------------------------
    Keeper of the Keys
    ------------------------------


  • 2.  RE: [6300/Airwave] Switch not detected by airwave

    EMPLOYEE
    Posted May 28, 2021 09:55 AM
    I see this is bug on the switch and it fixed in version 10.06.0110

    Below is the release notes. Refer to the page 10 and search for the bug ID: 151918

    https://support.hpe.com/hpesc/public/docDisplay?docId=a00112073en_us
    switch bug


    ------------------------------
    BHUSHAN PAWAR L
    ------------------------------

    Original Message