Wired

last person joined: 23 hours ago 

SNMPV3 query problem on switch 2530

This thread has been viewed 7 times
  • 1.  SNMPV3 query problem on switch 2530

    Posted Jul 01, 2021 06:04 AM
    Hi, 

    I've problem of querying SNMPV3 from my laptop to my switch 2530. 

    The settings in my switch 2530 are : 
    snmpv3 enable
    snmpv3 only
    snmpv3 group managerpriv user "Admin" sec-model ver3
    snmpv3 user Admin auth sha password priv aes password

    When I query using : 
    snmpwalk -v 3 -u Admin -l authPriv -a SHA -A password -x AES -X password 10.5.21.2

    it's always timeout. I'll try to look into the logs, it said that the authentication level that I used in snmpwalk is wrong. It said that I used noauthnopriv. But above command shows that I use authPriv. 

    So, what can I reconfigure from the switch ? Any ideas ?

    Thanks.

    ------------------------------
    Endrianus Gohan
    ------------------------------