Wired1

last person joined: 12 hours ago 

Expand all | Collapse all

2930F Untagged Vlan

This thread has been viewed 43 times
  • 1.  2930F Untagged Vlan

    Posted 27 days ago
      |   view attached
    Hello, i have a situation with switch model  Aruba 2930F. I want to assign a port(ex 20) to an untagged vlan, let's say on vlan4. 

    Initial status for port 20:

    1. ArubaVSF_1# sho runn int 1/20

                Ru1nning configuration:

                interface 1/20

               untagged vlan 1

               exit

    2. Triyng to put untagged vlan4 on port20:

    ArubaVSF_1# conf t

                ArubaVSF_1(config)# int 1/20

                ArubaVSF_1(eth-1/20)# untagged vlan 4

                4: Inconsistent value.

                ArubaVSF_1(eth-1/20)# untag vlan 99

                99: Inconsistent value

    3. If am triyng to put port20 tagged on vlan4 it let me:

    ArubaVSF_1(eth-1/20)# tagg vlan 4

     

                ArubaVSF_1(eth-1/20)# sho runn int 1/20

                Running configuration:

                interface 1/20

               tagged vlan 4

               untagged vlan 1

               exit



    4. I'm removing tagging from vlan4:

    ArubaVSF_1(eth-1/20)# no tagg vlan 4

     

            ArubaVSF_1(eth-1/20)# sho runn int 1/20

            Running configuration:

            interface 1/20

           untagged vlan 1

       exit

    5. Triyng to put untagged on vlan10 for ex.:

    ArubaVSF_1(eth-1/20)# untagged vlan 10

            10: Inconsistent value.

            ArubaVSF_1(eth-1/20)#

    I need some help, i have 2 switches(2930F) in vsf stack. I just want to assign any port(20 for ex.) untagged on any vlan(let's say 4), what is with 'Inconsistent value'? On another switch(2930F) which dosen't belong to vsf, it is in another configuration scheme , i can do this.  Is it true that i have another firmware version on the switch that i can do untagged. Those in vsf stack have #WC.16.10.0010 version.
    I also attached configuration.
    Thank you in advance!

      



    ------------------------------
    Dragos Ilie
    ------------------------------

    Attachment(s)

    docx
    config.docx   21 KB 1 version


  • 2.  RE: 2930F Untagged Vlan

    Posted 26 days ago
    you should assign port to vlan 4

    vlan 4
    untagged 1/20

    ------------------------------
    jongyong park
    ------------------------------



  • 3.  RE: 2930F Untagged Vlan

    Posted 26 days ago
    Technically speaking the procedure to assign the Untagged/Tagged membership(s) for a particular VLAN ID to a particular (Physical/Logical) interface (aka port) should work either way:

    • Context -> Interface id (or range) -> tag or untag assignment to VLAN ID (or range of IDs)
    • Context -> VLAN id -> tag or untag assignment to interface ID (or range of IDs)
    generally the latter is the preferred way working on HPE Aruba ArubaOS-Switch OS (or legacy HP ProVision OS) because it matches the "VLAN centric" fashion of the OS (but, again, it should work using both modes).

    The former is typically adopted when working on other Network OSes like the Comware 5/7 or the HPE Aruba ArubaOS-CX, OSes that are more "interface-centric" than ArubaOS-Switch.

    ------------------------------
    Davide Poletto
    ------------------------------



  • 4.  RE: 2930F Untagged Vlan

    Posted 26 days ago
      |   view attached
    Hi,

    Try to change the configuration from the vlan not from the port
    Check if there is an ip assigned to the vlan
    In the manual I send you are all the aruba switch event messages

    Good Luck !
    Ciro Gustavo Mele


    ------------------------------
    Ciro Gustavo Mele
    ------------------------------

    Attachment(s)

    pdf
    ArubaOS-Switch_Logs.pdf   1.66 MB 1 version


  • 5.  RE: 2930F Untagged Vlan

    Posted 22 days ago
    Hi, thank you for the info. Still i cannot do untagged port to vlan:

    ==========this is vlan 4=================<o:p></o:p>

    ArubaVSF_1# sho runn vlan 4
    Running configuration:
    vlan 4
       name "VOIP"
       tagged 1/6,1/25-1/33,2/6,2/13-2/17,2/46,Trk1-Trk2,Trk4-Trk9
       untagged 1/22
       ip address 192.168.4.254 255.255.254.0
       ipv6 enable
       ipv6 address autoconfig
       exit
    <o:p></o:p>

    ==============this is port 1/20===================
    ArubaVSF_1# sho runn int 1/20
    Running configuration:
    interface 1/20
       untagged vlan 1
       exit
    <o:p></o:p>

    ==========triyng from port to vlan============
    ArubaVSF_1# conf t
    ArubaVSF_1(config)# int 1/20
    ArubaVSF_1(eth-1/20)# untagged vlan 4
    4: Inconsistent value.
    ArubaVSF_1(eth-1/20)# end
    ArubaVSF_1# sho runn int 1/20
    Running configuration:
    interface 1/20
       untagged vlan 1
       exit
    <o:p></o:p>

    =========trying from vlan 4 to port============
    ArubaVSF_1# conf t
    ArubaVSF_1(config)# vlan 4
    ArubaVSF_1(vlan-4)# untagged 1/20
    1/20: Inconsistent value.
    ArubaVSF_1(vlan-4)# end
    ArubaVSF_1# sho runn vlan 4
    Running configuration:
    vlan 4
       name "VOIP"
       tagged 1/6,1/25-1/33,2/6,2/13-2/17,2/46,Trk1-Trk2,Trk4-Trk9
       untagged 1/22
       ip address 192.168.4.254 255.255.254.0
       ipv6 enable
       ipv6 address autoconfig
       exit
    <o:p></o:p>



    ------------------------------
    Dragos Ilie
    ------------------------------



  • 6.  RE: 2930F Untagged Vlan

    Posted 22 days ago
    Maybe it can be something phisical? I don't know..i am afraid to upgrade firmware from #WC.16.10.0010 to WC_16_10_0012. Maybe the upgrade will help me?

    Thank you.


    ------------------------------
    Dragos Ilie
    ------------------------------



  • 7.  RE: 2930F Untagged Vlan

    Posted 22 days ago
    Hi Dragos, does it let you to tag the port 1/20 with VLAN id 4? I mean...instead of changing the untagged VLAN id (PVID)...that's to see if the issue if with "untagging" the port only or it happens too with "tagging" the port with that particular VLAN id...what client are you using to perform CLI commands? PuTTY SSH? PuTTY direct Serial? other? maybe a bug in WC.16.10.0010? pretty strange.

    Have you tried to reboot the switch or to perform the same operation through the CLI Menu mode? in any case save the running configuration. It the running configuration file "clean"?

    ------------------------------
    Davide Poletto
    ------------------------------



  • 8.  RE: 2930F Untagged Vlan

    Posted 21 days ago
    Hi,  if i am tagging the port in vlan 4 i can do this, with no problem. The problem is when i try to untagg from vlan1. It dosen't come out from  untagged vlan1 so that i can put untagged in vlan4.

    Sim:

    ArubaVSF_1# sho runn int 1/20

    Running configuration:

    interface 1/20
    untagged vlan 1
    exit

    ArubaVSF_1# conf t
    ArubaVSF_1(config)# int 1/20
    ArubaVSF_1(eth-1/20)# tagg vlan 4
    ArubaVSF_1(eth-1/20)# sho runn int 1/20

    Running configuration:

    interface 1/20
    tagged vlan 4
    untagged vlan 1
    exit

    ArubaVSF_1(eth-1/20)# no tagged vlan 4
    ArubaVSF_1(eth-1/20)# sho runn int 1/20

    Running configuration:

    interface 1/20
    untagged vlan 1
    exit

    ArubaVSF_1(eth-1/20)# untagg vlan 4
    4: Inconsistent value.
    ArubaVSF_1(eth-1/20)#
    ArubaVSF_1(eth-1/20)# sho runn int 1/20
    Running configuration:
    interface 1/20
    untagged vlan 1
    exit
    ArubaVSF_1(eth-1/20)#

    ------------------------------
    Dragos Ilie
    ------------------------------



  • 9.  RE: 2930F Untagged Vlan

    Posted 16 days ago
    Do you have stack member?

    If not, you just type port number.

    Check port index.

    show interface brief

    and 

    vlan 4
      untagged 20

    ------------------------------
    jongyong park
    ------------------------------