I'm trying to edit an access point name and ip thru CLI. The web interface settings that I'm trying to access is attached. Any idea?
This article seem to be for a previous version of ArubaOS CLI. In ArubaOS 8.6, i get:(config) # clear provisioning-ap-list ^% Parse error
Do not use "config t"
CT_CNK7K9T2BX_WAD# clear provisioning-ap-list^% Parse errorCT_CNK7K9T2BX_WAD# provision-ap^% Parse errorCT_CNK7K9T2BX_WAD# show ap-env
Antenna Type:InternalNeed USB field:Noname:CT_CNK7K9T2BX_WADipaddr:192.168.1.131netmask:255.255.255.0gatewayip:192.168.1.1dnsip:0.0.0.0standalone_mode:1CT_CNK7K9T2BX_WAD#
What Im trying to do is to change that ap-env.Tried to do it with
#ap-env CT_CNK7K9T2BX_WAD OTHER
but even after the reset the AP the ap-env is the same
You don't use Aruba Controller but Instant AP
You can try this
interface vlan X
ip address 192.168.X.Y 255.255.255.0
or this via console port https://community.arubanetworks.com/t5/Controller-less-WLANs/How-do-I-configure-a-static-IP-addreess-to-an-Instant-Access/ta-p/185590
At Aruba, we believe that the most dynamic customer experiences happen at the Edge. Our mission is to deliver innovative solutions that harness data at the Edge to drive powerful business outcomes.
© Copyright 2021 Hewlett Packard Enterprise Development LPAll Rights Reserved.