I am new to API's and along with some colleagues have been tasked with creating a 'dashboard' which shows high level stats from all areas of our network - WLAN, LAN, FW etc. The data has to be for technical and non technical people alike.
We have a dashboard using Grafana and have some good details from the controllers using show commands but I was wondering if it was possible to take the client health data from the MM as an attribute via an API? Obviously the calculation to determine health is already being carried out on the MM and this can be sorted in a table by SSI, AP group etc.
What we would like to do is show pie charts in Grafana of client health by SSID / Building etc.
I have attached a screen shot from the MM for the chart I am talking about
Any suggestions are much appreciated
I think, it will be easy to make, you need to use show command API and use some show user command for get the info (and after count the number of each type...)
At Aruba, we believe that the most dynamic customer experiences happen at the Edge. Our mission is to deliver innovative solutions that harness data at the Edge to drive powerful business outcomes.
© Copyright 2021 Hewlett Packard Enterprise Development LPAll Rights Reserved.