This is an old thread. And please consider moving to EAP-TLS as PEAP with password is strongly deprecated because of broken encryption in the protocol.
------------------------------
Herman Robers
------------------------
If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check
https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.
In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.
------------------------------
Original Message:
Sent: Jan 03, 2022 02:14 AM
From: Hemanth SatyaKumar
Subject: PEAP profile connect without manually entering username and password
Hi Vinayashree,
Could you please share/guide the steps you followed to connect the EAP profile without entering user name and password manually.
------------------------------
Hemanth SatyaKumar
Original Message:
Sent: Jan 31, 2018 04:26 AM
From: vinayashree k s
Subject: PEAP profile connect without manually entering username and password
Thanks for the reply and solution
I found a way to connect to a EAP profile without entering user name and password manually.
But i took hex value of username and password and created a profile corresponding .reg file and imported it to registers .
It worked for me :)