I have three new aruba 2930F (24 and 48 Port).
I configured TACACS Login to console via Clearpass
aaa authentication ssh login tacacs local
aaa authentication ssh enable tacacs local
aaa authentication login privilege-mode
and Web Login via peap-mschapv2
aaa authentication web login peap-mschapv2 local
aaa authentication web enable peap-mschapv2 local
In this config the Switch sometimes crash and reboots after i entered my credentials in the web-login. Mostly when I'm already logged in with the same account via SSH.
Anybody experiencing the same problem? Any Solution
WC16.08.003 and WC.16.09.0001
Saved crash information:Health Monitor: Write Error Restr Mem AccessHW Addr=0xe25bf24f IP=0x1e965d88 Task='tHttpd' Task ID=0x37a2d500fp: 0x28dac30c sp:0x28dac2fc cpsr: 0x2000001f
Do you see this on all 3 new switches?
Can your reproduce it, even when the rest of the config is default? so only the neccessery AAA/radius config in it.
any relevant log info? show log -r
Switch crashes and reboots should be reported through Aruba TAC as they should never occur.
Firmware 16.09.003 should solve the Problem
Symptom/Scenario: When RADIUS authentication is configured for Web UI access and an attempt toestablish an HTTP connection is made to the switch from a web browser, the switch may crash with aHealth Monitor: Read Error Restr Mem Access message and Task='tHttpd'.
At Aruba, we believe that the most dynamic customer experiences happen at the Edge. Our mission is to deliver innovative solutions that harness data at the Edge to drive powerful business outcomes.
© Copyright 2021 Hewlett Packard Enterprise Development LPAll Rights Reserved.