View Only
last person joined: 3 days ago 

Enterprise security using ClearPass Policy Management, ClearPass Security Exchange, IntroSpect, VIA, 360 Security Exchange, Extensions and Policy Enforcement Firewall (PEF).
Expand all | Collapse all

Clearpass guest self-register

This thread has been viewed 15 times
  • 1.  Clearpass guest self-register

    Posted May 09, 2022 04:42 AM
      |   view attached
    I'm creating a wired guest authentication, the goal is that after the external device is connected to the company's wired network, it will be redirected to a self-registration page, the user will be able to sign in after registering on the page, and after passing the web authentication on Clearpass, they can get network access. Now I have created a self-registration page and successfully redirected the user to the self-registration page. But after the user clicks login after registration, "Please wait while you logged into the network..."is displayed, we see the Clear pass sends [Cisco - Bounce-Host-Port] to the switch in the Access Tracker, and then a new self-registration begins. How do I implement the requirements?

    Hevin Huo

  • 2.  RE: Clearpass guest self-register

    Posted Jun 07, 2022 08:16 AM
    You will need a MAC authentication service to allow the registered device to the network. This video may help; it's for wired guest, but should work similar for device registration where you include the Guest Devices repository into your MAC authentication service. To better understand the MAC Auth vs. Captive Portal, you could check this video.

    Your Aruba partner, or Aruba Support should be able to help with this as it is about combining a few standard building blocks.

    Herman Robers
    If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.

    In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.