Security

 View Only
last person joined: 21 hours ago 

Forum to discuss Enterprise security using HPE Aruba Networking NAC solutions (ClearPass), Introspect, VIA, 360 Security Exchange, Extensions, and Policy Enforcement Firewall (PEF).
Back to discussions
Expand all | Collapse all

Add snmp on cppm

This thread has been viewed 9 times

  • 1.  Add snmp on cppm

    Posted Oct 13, 2021 05:58 AM
    Hi. I need to add new snmp entry on cppm. Can i check if there will be any services that need to restart after adding? Will it cause any downtime to the network?

    ------------------------------
    Grace See
    ------------------------------


  • 2.  RE: Add snmp on cppm

    EMPLOYEE
    Posted Oct 14, 2021 06:12 AM
    As in an SNMP Trap receiver, or as in the SNMP service on the ClearPass server for remote polling of the ClearPass.

    In both cases, I don't think you need to restart anything, and I don't think there is any service outage except possibly for the SNMP service itself (very short), but you change the configuration so it should practically not be an outage.

    ------------------------------
    Herman Robers
    ------------------------
    If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.

    In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.
    ------------------------------

    Original Message