Has this worked for you before? I see you have a TAC case open, they should be able to troubleshoot as from this above it is hard to tell. I couldn't find other TAC cases around the same message.
If you feel there is not enough progress on that case, feel free to request an escalation.
------------------------------
Herman Robers
------------------------
If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check
https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.
In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.
------------------------------
Original Message:
Sent: Oct 19, 2021 06:47 PM
From: Varun Sharma
Subject: Clearpass Crowdstrike API HTTP
Hi Matt,
Thank you for replying to my message. I enabled Digicert Root and High Assuranace CA certificates but still don't see any change. I have got the same error still . Could you please share with me your setting on 6.10 what you have configured. I am not looking for an upgrade from 6.9.7 to 6.10 soon.
Please see some captures below
Thanks
Varun
------------------------------
Varun Sharma
Original Message:
Sent: Oct 19, 2021 08:04 AM
From: Matthew Sutherland
Subject: Clearpass Crowdstrike API HTTP
I'm guessing this is the extension passing the error and not the endpoint context server action.
The Crowdstrike extension is set to verify the SSL certs and shown in the config. If it is verifying the certificate of api.crowdstrike.com against CPPMs built in trust store (I have no idea if this is the case or not, sorry) then it may be that the appropriate certificates don't exist or are not trusted:
depth=2 C = US, O = DigiCert Inc, OU = www.digicert.com, CN = DigiCert High Assurance EV Root CA
verify return:1
depth=1 C = US, O = DigiCert Inc, OU = www.digicert.com, CN = DigiCert SHA2 High Assurance Server CA
verify return:1
verify return:1
I checked my CPPM (6.10.2) and noted that the Digicert High Assurance EV was disabled. I don't seem to have the DigiCert SHA2 High Assurance Server CA certificate in the trust store but that should be OK. Maybe try enabling the root CA certificate and check again if that makes a difference?
Original Message:
Sent: Oct 19, 2021 01:57 AM
From: Varun Sharma
Subject: Clearpass Crowdstrike API HTTP
Hi All,
I need some assistance in ClearPass and Crowdstrike API integration. I have configured ClearPass settings as per the tech notes released by Danny last year. Clearpass started giving HTTP error. I noticed the same error was reported by another client but there is no solution on airheads.
https://community.arubanetworks.com/community-home/digestviewer/viewthread?MID=239414
Troubleshooting Steps performed.
Tried disable SSL certificate - i.e. False
Tried adding Bypass Proxy in the configuration - No luck
Tried restarting extension service
Below are the errors seeing on ClearPass
2021-10-19T16:01:00.104] [INFO] CrowdStrike - Getting next page of devices...[2021-10-19T16:01:00.104] [ERROR] CrowdStrike - Protocol "http:" not supported. Expected "https:"[2021-10-19T16:01:00.105] [ERROR] CrowdStrike - Protocol "http:" not supported. Expected "https:"
------------------------------
Varun Sharma
------------------------------