You can configure traditional port-security on the 6300M. All the usual commands fall under the
'port-access port-security' config within the interface:
Aruba-6300M-CORE-Switch# conf tAruba-6300M-CORE-Switch(config)# int 1/1/2Aruba-6300M-CORE-Switch(config-if)# port-access port-security ?client-limit Define number of authorized address on the port. disable Disable port-security on the port enable Enable port-security on the port mac-address Configure to authorize the client on the port. sticky-learn Configure sticky learning on the port. <cr>------------------------------
Scott Nyer
------------------------------
Original Message:
Sent: Sep 22, 2021 04:06 PM
From: Elijah Baltierra
Subject: 6300M
Hello!
I'm new to Aruba and trying to wrap my head around port security on my new 6300m switches. In the past I was able to define port access by MAC address on my old switches. How do I do this with Aruba 6300m? Do I need a clearpass server?
Thanks!
------------------------------
Elijah Baltierra
------------------------------