Security

 View Only
last person joined: yesterday 

Forum to discuss Enterprise security using HPE Aruba Networking NAC solutions (ClearPass), Introspect, VIA, 360 Security Exchange, Extensions, and Policy Enforcement Firewall (PEF).
Back to discussions
Expand all | Collapse all

CPPM MAC Based auth - Device not detected

This thread has been viewed 12 times

  • 1.  CPPM MAC Based auth - Device not detected

    Posted Jul 14, 2021 04:24 AM
    Hello guys,

    I'd like to get some help to solve this issue. I have Mac-based enabled (ArubaOS switch), all ports are working fine and devices are being authenticated but some of them (2% aprox) are not authenticating the connected devices. If I disable the authentication on these ports, devices work properly, but once I enable the authentication I cannot see any authentication query in the CPPM, the switch does not show any Mac-address connected to these ports and If I enable a debug, I can see how the switch detects that these ports are active, but it Does not detect a "new client" on these ports to begin the authentication process.

    Is there any configuration change to apply to the switch, which could help me to solve this issue?

    Thanks in advance.

    ------------------------------
    tech_sec
    ------------------------------


  • 2.  RE: CPPM MAC Based auth - Device not detected

    MVP GURU
    Posted Jul 14, 2021 06:18 AM
    What software version are you running?

    ------------------------------
    Dustin Burns
    Senior Mobility and Access Engineer @WEI

    ACCX 1271| ACMX 509| ACSP | ACDA | MVP Guru 2021
    If my post was useful accept solution and/or give kudos
    ------------------------------

    Original Message