What is the output of 'show auth-tracebuf'? There you can see the username being sent. Also, for MAC auth make sure you have an account that has the username and password both set to the mac address in the right format (colon, lower case if that is what you configured).
------------------------------
Herman Robers
------------------------
If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check
https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.
In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.
------------------------------
Original Message:
Sent: Jan 05, 2022 01:51 PM
From: Mark Reimer
Subject: Internal database debugging
I have an SSID, with PSK + Mac auth. I built it using Mr. RFC template. Airheads CommunityAirheads Community | remove preview |
|
. I just changed the location from his MM to MD. Nothing is getting authenticated, and I suspect it's in the MAC auth portion. Are there debug commands to see what happens on the DB side?
------------------------------
Mark Reimer
------------------------------