I am new here and I have a question about upgrading comware.
1) Is it needed to upgrade switch gradually, if I haven't upgrade switch from 2008? I am implying that in some IT system you have to upgrade first of all one version then another in order to get the latest version.
2) When I downloaded the new firmware from official site, it contains 3 files. The question is which firmware I should pick to upgrade and for what purpose other 2 files? List of files:
My current firmware version
HPE Comware Software, Version 7.1.045, Release 1121Copyright (c) 2010-2016 Hewlett Packard Enterprise Development LPHPE 5510 48G PoE+ 4SFP+ HI 1-slot Switch JH148A uptime is 21 weeks, 4 days, 6 hours, 23 minutesLast reboot reason : Cold reboot
Boot image: flash:/5510hi-cmw710-boot-r1121.binBoot image version: 7.1.045, Release 1121Compiled Aug 17 2016 16:00:00System image: flash:/5510hi-cmw710-system-r1121.binSystem image version: 7.1.045, Release 1121Compiled Aug 17 2016 16:00:00
Slot 1:Uptime is 21 weeks,4 days,6 hours,23 minutesHPE 5510 48G PoE+ 4SFP+ HI 1-slot Switch JH148A with 2 ProcessorsBOARD TYPE: 5510 48G PoE+ 4SFP+ HI 1-slot SwitchDRAM: 1984M bytesFLASH: 512M bytesPCB 1 Version: VER.BBootrom Version: 123CPLD 1 Version: 003Release Version: HPE 5510 48G PoE+ 4SFP+ HI 1-slot Switch JH148A-1121Patch Version : NoneReboot Cause : ColdReboot[SubSlot 0] 48GE+4SFP Plus
At Aruba, we believe that the most dynamic customer experiences happen at the Edge. Our mission is to deliver innovative solutions that harness data at the Edge to drive powerful business outcomes.
© Copyright 2021 Hewlett Packard Enterprise Development LPAll Rights Reserved.