Network Management

last person joined: yesterday 

Keep an informative eye on your network with IMC and AirWave network management solutions.
Expand all | Collapse all

Airwave and 8.x - RF Neighbor reporting

This thread has been viewed 12 times
  • 1.  Airwave and 8.x - RF Neighbor reporting

    Posted Oct 01, 2021 09:03 AM
    I've noticed as we've migrated from 6.x to 8.6 that I'm losing RF Neighbor visibility in Airwave - I get "No records available".  Is this expected behavior?  I've found this to be an invaluable tool for remotely assessing AP density when maps aren't available.  Airwave version 8.2.8.2, AOS 8.6.0.9 FWIW.   Thanks in advance.

    ------------------------------
    Dave Terrian
    ------------------------------


  • 2.  RE: Airwave and 8.x - RF Neighbor reporting

    Posted Oct 01, 2021 09:54 AM
    Airwave requires turning on Amon to see neighbors.  Did you turn on AMON during your migration? https://www.arubanetworks.com/techdocs/ArubaOS_8.7.1_Web_Help/Content/arubaos-solutions/manage-utilities/conn-aw-serv.htm

    You can determine in Airwave if you getting an AMON feed from your controllers by going to Home> System> Performance> AMON Statistics.  If all the AMON graphs are flat, setup Airwave in your MM high in your heirarchy using Configuration> System > Airwave.


    ------------------------------
    Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.
    ------------------------------



  • 3.  RE: Airwave and 8.x - RF Neighbor reporting

    Posted Oct 01, 2021 10:17 AM
    AMON from MM and node heirarchy is needed for proper monitoring AOS 8.x from Airwave. 
    Additionally, enable the option 'Poll local controller for improved Rogue collection' from RAPIDs > Setup Page.

    ------------------------------
    Gowri Sankar Amujuri
    ------------------------------