Network Management

 View Only
last person joined: 10 hours ago 

Keep an informative eye on your network with HPE Aruba Networking network management solutions
Back to discussions
Expand all | Collapse all

Automatic transfer of backup no longer in Airwave 8.2.12

This thread has been viewed 21 times

  • 1.  Automatic transfer of backup no longer in Airwave 8.2.12

    Posted May 17, 2021 01:28 AM
    Hi all,

    My organisation is migrating from Airwave 8.2.9.1 to 8.2.12.1. There are a few teething problems but one thing that we've found is a missing menu option in the AMP CLI to configure the automatic transfer of the backups.

    This used to be under option 4 (Backups), and be option 2.

    However, in the new version, we only see the option for backup and restore. Since root access is blocked once you get AMP configured is there no way to transfer the backup to an external server as just in case?

    ------------------------------
    John Rehill
    ------------------------------


  • 2.  RE: Automatic transfer of backup no longer in Airwave 8.2.12
    Best Answer

    MVP GURU
    Posted May 17, 2021 08:52 AM
    Use this menu navigation:
    2 Backups
    1 Backup
    2 Configure Automatic Transfer
    1 Set Destination
    Follow the instructions in the wizard.


    ------------------------------
    Dustin Burns
    ACCX 1271| ACMX 509| ACSP | ACDA | MVP Guru 2021
    If my post was useful accept solution and/or give kudos
    ------------------------------

    Original Message


  • 3.  RE: Automatic transfer of backup no longer in Airwave 8.2.12

    Posted May 17, 2021 10:22 PM
    Thank you!

    I never looked further as I thought that option would start a backup rather than providing further options.

    Now all setup.

    ------------------------------
    John Rehill
    ------------------------------

    Original Message