Network Management

last person joined: 20 hours ago 

Keep an informative eye on your network with IMC and AirWave network management solutions.
Expand all | Collapse all

UBT Client not Seen on Airwave

This thread has been viewed 9 times
  • 1.  UBT Client not Seen on Airwave

    Posted Aug 02, 2021 12:20 PM
    Hi Guys,

    I have UBT setup on my CX6300M to my MC72XX. Both Switch and controller are managed by Airwave.

    My client count in Airwave is 0 , although the client can be seen in the MC72XX as a tunnel node client

    In airwave, if I monitor the neighbor/connected devices, I can see the MAC address of the client. 

    Im using Airwave and CX 10.06 , and AOS on MC.

    Anyone can point out what am I missing or why I can't see my client on Airwave?

    Jason Leong Kwong Fei

  • 2.  RE: UBT Client not Seen on Airwave

    Posted Aug 30, 2021 05:26 AM
    Try upgrade server to latest code and check the status, if issue still persist open TAC ticket.

    Pavan Arshewar
    Principal Network Engineer

    If my post addresses your query, give kudos!