Hi Guys,
I have UBT setup on my CX6300M to my MC72XX. Both Switch and controller are managed by Airwave.
My client count in Airwave is 0 , although the client can be seen in the MC72XX as a tunnel node client
In airwave, if I monitor the neighbor/connected devices, I can see the MAC address of the client.
Im using Airwave 8.2.10.0 and CX 10.06 , and AOS 8.6.0.2 on MC.
Anyone can point out what am I missing or why I can't see my client on Airwave?
------------------------------
Jason Leong Kwong Fei
------------------------------