In packet capture if we are seeing Airwave forwarding event to external NMS server then you need to check your network for any port block?
We can take packet capture on NMS server for Airwave IP and see if you are seeing any traffic to narrow down network issue.
------------------------------
Pavan Arshewar
Principal Network Engineer
If my post addresses your query, give kudos!
------------------------------
Original Message:
Sent: Feb 21, 2021 08:40 PM
From: zhipeng ma
Subject: airwave nms config,airwave mm client numbers not same
Thank you very much for your reply. The captured packet sent by amp can be seen, but nms cannot receive it. I consulted tac and the problem has not been resolved.
------------------------------
leo ma
Work hours: 9:00 PM to 6:00 AM GMT (+8) | Monday - Friday
SE
FOLLOW CN | Twitter | LinkedIn
Original Message:
Sent: Jan 06, 2021 10:26 AM
From: Pavan Arshewar
Subject: airwave nms config,airwave mm client numbers not same
Does Airwave added as management server in MM controller? Client data update in Airwave using AMON protocol and we need to add server as management server in controller for clients to get updated.
Does triggered generated in Airwave ? If yes, we need to take tcpdump packet capture on destination server IP from AMPCLI during the time when airwave generating trigger.
If Airwave generated trigger but not seeing in packet capture then it is a bug. I would recommend to upgrade to latest code and check once.
------------------------------
Pavan Arshewar
Original Message:
Sent: Dec 21, 2020 01:56 AM
From: zhipeng ma
Subject: airwave nms config,airwave mm client numbers not same
hi all
I configured the nms server and selected it in the trigger, but the nms server cannot receive any messages. How can I troubleshoot this? The airwave version is 8.2.10.1, and the number of my airwave and mm clients is inconsistent.