Hi,
it is better to open issue on TAC
------------------------------
PowerArubaSW : Powershell Module to use Aruba Switch API for Vlan, VlanPorts, LACP, LLDP...
PowerArubaCP: Powershell Module to use ClearPass API (create NAD, Guest...)
PowerArubaCL: Powershell Module to use Aruba Central
PowerArubaCX: Powershell Module to use ArubaCX API (get interface/vlan/ports info)..
ACEP / ACMX #107 / ACDX #1281
------------------------------
Original Message:
Sent: Dec 28, 2021 01:46 PM
From: Minh Nguyen
Subject: IMC - How to clear mass alerts
Hi everyone,
I just upgraded IMC from E0705P12 to E0706P06 and now I have millions of warnings regarding the loopback IP address conflict. I have filtered the warning so it stopped but I still have about 2.5million warnings prior to the filter that are not cleared. Anyway to clear them all instead of 200 at a time?
I have went into Alarm Settings and Process All Alarms and did a Recover All but doesn't seemed to work.
Thanks
------------------------------
Minh Nguyen
------------------------------