Network Management

 View Only
last person joined: 17 hours ago 

Keep an informative eye on your network with HPE Aruba Networking network management solutions
Back to discussions
Expand all | Collapse all

HPE IMC - Network Topology problem

This thread has been viewed 28 times

  • 1.  HPE IMC - Network Topology problem

    Posted Jan 14, 2022 03:16 PM

    Hello, 

    I have problem with Network Topology in IMC. I installed newly IMC (iMC PLAT 7.3 (E0706)) on Windows Server, and I am trying to set ip up, but I found one problem that links are missing between our switches (HPE) and APs (Cisco). In our old server on Linux (iMC PLAT 7.3 (E0703)), it works fine and all links were added automatically. 

    Old IMC

    https://ibb.co/JcrhNF9

    New IMC

    https://ibb.co/4stLdLF

    Can you give me some advice on how to solve the problem? Thank you.



    ------------------------------
    Ondrej Čech
    ------------------------------


  • 2.  RE: HPE IMC - Network Topology problem

    EMPLOYEE
    Posted Jan 18, 2022 03:42 AM
    Hello,

    Could it be that your new installation does not include the WSM (Wireless Service Management) module, while your old one does? WSM is included in the IMC Enterprise installation package and is typically what would provide you with Wireless topologies.

    ------------------------------
    Justin Guse
    ------------------------------

    Original Message


  • 3.  RE: HPE IMC - Network Topology problem

    Posted Jan 18, 2022 04:26 AM
    Hello, 
    WSM is deployed, also I see all APs and their access interfaces on switches in Service->WLAN Manager->Resource Management-> AP Access ports. But in network topology, I still can't see links between them.

    ------------------------------
    Ondrej Čech
    ------------------------------

    Original Message