Hello,
WSM is deployed, also I see all APs and their access interfaces on switches in Service->WLAN Manager->Resource Management-> AP Access ports. But in network topology, I still can't see links between them.
------------------------------
Ondrej Čech
------------------------------
Original Message:
Sent: Jan 18, 2022 03:42 AM
From: Justin Guse
Subject: HPE IMC - Network Topology problem
Hello,
Could it be that your new installation does not include the WSM (Wireless Service Management) module, while your old one does? WSM is included in the IMC Enterprise installation package and is typically what would provide you with Wireless topologies.
------------------------------
Justin Guse
Original Message:
Sent: Jan 14, 2022 02:07 AM
From: Ondrej Čech
Subject: HPE IMC - Network Topology problem
Hello,
I have problem with Network Topology in IMC. I installed newly IMC (iMC PLAT 7.3 (E0706)) on Windows Server, and I am trying to set ip up, but I found one problem that links are missing between our switches (HPE) and APs (Cisco). In our old server on Linux (iMC PLAT 7.3 (E0703)), it works fine and all links were added automatically.
Old IMC
https://ibb.co/JcrhNF9
New IMC
https://ibb.co/4stLdLF
Can you give me some advice on how to solve the problem? Thank you.
------------------------------
Ondrej Čech
------------------------------