Network Management

 View Only
last person joined: 15 hours ago 

Keep an informative eye on your network with HPE Aruba Networking network management solutions
Back to discussions
Expand all | Collapse all

SNMP Temperature monitoring

This thread has been viewed 31 times

  • 1.  SNMP Temperature monitoring

    MVP
    Posted May 27, 2021 01:53 PM
    Hi,

    We have a mixed setup with switches from different generations, I know some don't have any way of monitoring temperature (25xx) but others definitely do have temperature data that is exposed through the WebUI but is not available over SNMP.

    Specifically CX8320 and CX6400 (running 10.06.0101), the weird thing to me is that we also have CX6300 switches which run the same firmware as the 6400 and they do expose some temperature data over SNMP (they actually only expose a single reading while the WebUI shows many more sensors).

    So am I just looking at the wrong SNMP table (1.3.6.1.2.1.99.1.1.1 - ENTITY-SENSOR), is this a setting I need to enable or is this a known bug/missing feature?

    Thanks!

    ------------------------------
    Keeper of the Keys
    ------------------------------


  • 2.  RE: SNMP Temperature monitoring

    MVP
    Posted Jul 26, 2021 05:11 PM
    Bump

    ------------------------------
    Keeper of the Keys
    ------------------------------

    Original Message


  • 3.  RE: SNMP Temperature monitoring

    MVP GURU
    Posted Jul 27, 2021 03:20 PM
    use APi (for CX), you have all same temperature like Web GUi

    ------------------------------
    PowerArubaSW : Powershell Module to use Aruba Switch API for Vlan, VlanPorts, LACP, LLDP...

    PowerArubaCP: Powershell Module to use ClearPass API (create NAD, Guest...)

    PowerArubaCL: Powershell Module to use Aruba Central

    PowerArubaCX: Powershell Module to use ArubaCX API (get interface/vlan/ports info)..

    ACEP / ACMX #107 / ACDX #1281
    ------------------------------

    Original Message