Then it may be best to work with support, as I run the same firmware on a 6300F (10.08.1030), and I see the edit.
You could also use the CLI, of course, if you just need the configuration to be in.
------------------------------
Herman Robers
------------------------
If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check
https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.
In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.
------------------------------
Original Message:
Sent: Jan 10, 2022 07:51 AM
From: Nils Vielkind
Subject: aruba switch 6200F cannot edit interfaces in WEB UI
Yes. Firmware Update is available in the GUI
Original Message:
Sent: Jan 10, 2022 07:44 AM
From: Herman Robers
Subject: aruba switch 6200F cannot edit interfaces in WEB UI
Can you access other admin features, like firmware updates?
------------------------------
Herman Robers
------------------------
If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.
In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.
Original Message:
Sent: Jan 10, 2022 05:46 AM
From: Nils Vielkind
Subject: aruba switch 6200F cannot edit interfaces in WEB UI
We use the built-in admin account without any radius configuration or remote accounts.
The pencil is missing in AOS-CX-10.08.1030 an 10.05.0021.
We have tested edge browser, internet explorer, firefox and chrome.
Original Message:
Sent: Jan 10, 2022 05:36 AM
From: Herman Robers
Subject: aruba switch 6200F cannot edit interfaces in WEB UI
Normally you have manager privileges when you login as admin. Do you use the built-in admin/manager account? Or do you have something configured for RADIUS/TACACS and remote admin accounts?
Can you access for example the firmware update feature when logged in as admin?
What version of AOS-CX do you run?
------------------------------
Herman Robers
------------------------
If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.
In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.
Original Message:
Sent: Jan 10, 2022 04:53 AM
From: Nils Vielkind
Subject: aruba switch 6200F cannot edit interfaces in WEB UI
Thanks for your reply! The pencil doesn't appear but i'm logged in as "admin" with the administrator role.
How do i get manager privileges?
Original Message:
Sent: Jan 07, 2022 07:32 AM
From: Herman Robers
Subject: aruba switch 6200F cannot edit interfaces in WEB UI
Are you logged in with manager privileges?
There should be a pencil, and with that you can edit the port speed:
I'm running AOS-CX 10.8.
If you have not logged on or with operator profile, you may not see the pencil.
------------------------------
Herman Robers
------------------------
If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.
In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.
Original Message:
Sent: Jan 04, 2022 09:05 AM
From: Nils Vielkind
Subject: aruba switch 6200F cannot edit interfaces in WEB UI
Hi folks,
i cannot edit an switch port in the interfaces menu, for example to change the port speed in the web ui.
In the web ui guide is an edit button near the selected interface, but in my UI is no edit button. i have tried several browsers and different firmware images.
can you help me how to edit the port speed in the web ui?
kind regards