Network Management

last person joined: 16 hours ago 

Keep an informative eye on your network with IMC and AirWave network management solutions.
Expand all | Collapse all

Allow Device on Diffrent Vlans to Router

This thread has been viewed 7 times
  • 1.  Allow Device on Diffrent Vlans to Router

    Posted May 04, 2021 12:13 PM

    Im new in Aruba in general and the Community and would like to know about the below issue I have.
    - I already post this but I can't return to it, seems I did a mistake on posting so I did it a gain

    I have a PC connected to Switch (A) 1930 untaged with Vlan 3
    This Switch (A) and similar 3 Switches (C,D,E) connected to Hub Switch(X) 2530 on Tagged Vlans 2,3,16,5,2,..

    A, B, C, and D switches connect to Switch(X) on Vlan 5.

    The issue is:
    1- I can't reach the router ip on Vlan 16 from the PC on Vlan 3. until I can reach 192.168.50

    on SW(A) I already set default route to be to
    on SW (X) default gateway is Sure I cant make a static route
    I also set ip for vlan 16 on SW (A) but the VLAN still down.

    So, I don't know where is the issue as I need PC  t0 reach

    Aruba 2530-24G Switch (J9776A)
    Aruba1930-48G Switch (JL686A)


    MR Network

  • 2.  RE: Allow Device on Diffrent Vlans to Router

    Posted May 04, 2021 09:47 PM
    Do you have routes for both directions to, and back to ?

    VLAN 16 shows as down, can you check to see if VLAN 16 is tagged on both sides of SwitchA and SwitchX.

    Dustin Burns

    If my post was useful accept solution and/or give kudos