Network Management

Hi All

Please I require some advice with updating a Core Stack x4

Some articles say this can be done via website GUI but my concern is that when doing so with a stacked switch, don't you need to boot system rather for the entire stack to restart ? (CLI)

Also I have reached out to Aruba support as this current version is old KB 16.07.003, they recommended updating to KB 16.09, run the "Boot-System flash Pri |Sec depending on which image is being updated 

Has anyone done stacking firmware update from the GUI with 3 or more members and thereafter selected boot primary then reboot ? for this model

Regards,

------------------------------
Warren Maistry
------------------------------

Yes you can perform this from the WebGUI, and it will reboot the entire stack.

------------------------------
Dustin Burns
Lead Mobility Engineer @WEI

ACCX 1271| ACMX 509| ACSP | ACDA | MVP Guru 2021
If my post was useful accept solution and/or give kudos
------------------------------

Original Message:
Sent: Jan 19, 2022 07:42 AM
From: Warren Maistry
Subject: Aruba 3810M stack - Firmware update

Hi All

Please I require some advice with updating a Core Stack x4

Some articles say this can be done via website GUI but my concern is that when doing so with a stacked switch, don't you need to boot system rather for the entire stack to restart ? (CLI)

Also I have reached out to Aruba support as this current version is old KB 16.07.003, they recommended updating to KB 16.09, run the "Boot-System flash Pri |Sec depending on which image is being updated 

Has anyone done stacking firmware update from the GUI with 3 or more members and thereafter selected boot primary then reboot ? for this model

Regards,

------------------------------
Warren Maistry
------------------------------

Original Message:
Sent: 1/19/2022 10:53:00 AM
From: DB86
Subject: RE: Aruba 3810M stack - Firmware update

Yes you can perform this from the WebGUI, and it will reboot the entire stack.

------------------------------
Dustin Burns
Lead Mobility Engineer @WEI

ACCX 1271| ACMX 509| ACSP | ACDA | MVP Guru 2021
If my post was useful accept solution and/or give kudos
------------------------------

Original Message:
Sent: Jan 19, 2022 07:42 AM
From: Warren Maistry
Subject: Aruba 3810M stack - Firmware update

Hi All

Please I require some advice with updating a Core Stack x4

Some articles say this can be done via website GUI but my concern is that when doing so with a stacked switch, don't you need to boot system rather for the entire stack to restart ? (CLI)

Also I have reached out to Aruba support as this current version is old KB 16.07.003, they recommended updating to KB 16.09, run the "Boot-System flash Pri |Sec depending on which image is being updated 

Has anyone done stacking firmware update from the GUI with 3 or more members and thereafter selected boot primary then reboot ? for this model

Regards,

------------------------------
Warren Maistry
------------------------------