Cloud Managed Networks

 View Only
last person joined: 2 days ago 

Forum to discuss all things related to HPE Aruba Networking Central and UXI Network Management, including deployment of managed networks, configuration, best practices, APIs, Cloud Guest, AIOps, Presence Analytics, and other included Applications
Back to discussions
Expand all | Collapse all

Radio won't enable

This thread has been viewed 26 times

  • 1.  Radio won't enable

    Posted Feb 13, 2021 05:05 PM
    Hi, I have an Aruba IAP-207 In central and I'm trying to get my wlans working. I have everything configured including country code but under the AP status the radios say disabled even though they aren't and I'm not getting a SSID. The radio led is not on but I still was getting the set me up before I added to central. Is there anything I am missing? Thanks, Jack

    ------------------------------
    Jack Sommers
    ------------------------------


  • 2.  RE: Radio won't enable

    EMPLOYEE
    Posted Feb 13, 2021 05:17 PM
    You have to add the device to Central, assign it to a group and be sure that the country code is set.

    ------------------------------
    Rafael Del Cerro Flores
    ------------------------------

    Original Message


  • 3.  RE: Radio won't enable

    Posted Feb 13, 2021 05:26 PM
    I already did all of that

    ------------------------------
    Jack Sommers
    ------------------------------

    Original Message


  • 4.  RE: Radio won't enable

    EMPLOYEE
    Posted Feb 14, 2021 07:15 AM

    It sound like this Instant OS version were not enable for the country code you selected, could you try (as a test only) to change country code?

     

    You can check DRT files in order to go deep on that

     

    Regards

     

     

    --------------

    Jorge Calvi

    --------------

     

     




    Original Message


  • 5.  RE: Radio won't enable

    Posted Apr 13, 2021 11:38 AM
    You can configure 2.4 GHz and 5 GHz radio settings for an IAP either using Instant UI or CLI;

    1. Click the RF link at the top right corner of the Instant main window.
    2. Click Show advanced options. The advanced options are displayed.
    3. Click the Radio tab.
    4. Under the channel 2.4.GHz or 5GHz or both, configure the following parameters.


    ------------------------------
    Nich Fky
    ------------------------------

    Original Message