Hi All,
I have configured a number of switches (same model and firmware) in Aruba Central using Template Groups and all are In Sync except 2.
When the template is pushed to the switch there is very little information in the Audit Trail, and the log on the switch shows these entries which are pretty vague.
Any ideas on troubleshooting this?
Thanks in advance.
---- Reverse event Log listing: Events Since Boot ----
I 11/19/20 16:55:56 05633 cfgRestore: Successfully restored source configuration
REST_Payload to running configuration.
I 11/19/20 16:55:54 05257 central: Aruba Central support mode is enabled.
I 11/19/20 16:55:52 05639 cfgRestore: Configuration restore to REST_Payload has
failed, started recovery to source config.
I 11/19/20 16:55:45 05258 central: Aruba Central support mode is disabled.
I 11/19/20 16:55:43 05690 cfgRestore: Configuration restore is initiated.
I 11/19/20 16:55:42 05578 profile-manager: With this SW release the poe-value
field is not allowed to be set when poe-alloc-by is not value.
Changing to default value of 17w.
I 11/19/20 16:55:40 02716 auth: User admin : Manager mode password is set
------------------------------
Andrew Joraslafsky
------------------------------