Wireless Access

last person joined: 10 hours ago 

Access network design for branch, remote, outdoor and campus locations with Aruba access points, and mobility controllers.
Expand all | Collapse all

3400 Controller

Jump to Best Answer
This thread has been viewed 0 times
  • 1.  3400 Controller

    Posted Oct 20, 2014 10:18 AM

    I have a defaulted 3400 controller, re-porvisioned AP's and when I connect to the SSID and open google maps\maps its telling me my location as China.  I have confirmed that the time zone is set correctly on the controller.  The OS running is  


    Any thoughts?


  • 2.  RE: 3400 Controller

    Posted Oct 20, 2014 10:21 AM
    The location is based off your IP space/ISP, not any information from your wireless controller.

  • 3.  RE: 3400 Controller

    Posted Oct 20, 2014 01:15 PM

    Thanks for the response.  The controller was over in China for a show and once it was brought back here it was reset and it's showing my maps application that I am in China still when connecting to the SSID that it's broadcasting.  Any other possibilities that would cause this?

  • 4.  RE: 3400 Controller
    Best Answer

    Posted Oct 20, 2014 02:57 PM

    It gets this information from your public IP address. If it's still somehow source nat'ing to something in China then that would be why.